HobbyWireless
BATTLESWITCH MINI RC SWITCH
| Max relay voltage | 240VAC |
| Max relay current | 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC. |
| Relay resistance | 100 mΩ max |
| Dimensions | 1.25" x 1.25" x 0.9" |
| Diagrams | Exemple of diagram |
Details:, BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics., Specifications:, , Applications:,
BattleSwitch plugs into a standard hobby radio control receiver as ...HobbyWireless
TX-V524 500MW 2.4 GHZ PLUG AND PLAY TRANSMITTER WITH WIRES - LAWMATE
| Nominal output impedance | 50 ohms |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
| Weight | 18g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Operating Voltage: 5.5 - 13 volts DC (to use with 12V camera you can only power the transmitter using 12V source, 3S 11.1V Lipo battery works great)., Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
TX-V1024 1000MW 2.4 GHZ PLUG AND PLAY TRANSMITTER WITH WIRES - LAWMATE
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 40g (transmitter only) |
Details:, This is a plug and play transmitter only, part of our FPV1024 plug and play system., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
T524 TRANSMITTER 2.4GHZ 500MW - LAWMATE
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
| Weight | 14g (transmitter only). |
| · Nominal output impedance | 50 ohms |
| · 75-ohm impedance | 1Vp-p |
| · 10k ohm impedance | 1Vp-p |
| · Sub carrier frequency | 6.5MHz |
| · Operation temperature | -10 to 40 degrees Celsius |
| · Storage temperature | -40 to 80 degrees Celsius |
| · Operating humidity | 20 to 80% |
| to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This is a great little transmitter., Features:, , Specifications:, , Standard shipping package:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It uses PLL technology, very tiny and so light weight ...HobbyWireless
T1024 TRANSMITTER 2.4GHZ 1000MW - LAWMATE
| Weight | 30g (transmitter only) |
| Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
| Nominal output impedance | 50 ohms |
| Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
| Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
| Video input voltage 75-ohm impedance | 1Vp-p |
| Audio input voltage 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Storage humidity | 10 to 80% |
| Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
| to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output., :, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It has eight (8) selectable channels and it is the ...HobbyWireless
TX-V584 5.8 GHZ 400MW PLUG & PLAYTRANSMITTER & WIRES - NEW VERSION
| - Output Power | 400mW |
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
Details:, This is another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios., Note:, to use any other antenna besides the original an, Transmitter features:, , Includes:, - TX-V584 5.8 GHz 400mw transmitter., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The 400mW 5.8 GHz transmitter and receiver are capable to ...HobbyWireless
TX-V582 5.8 GHZ 200MW PLUG & PLAYTRANSMITTER & WIRES - NEW VERSION
| Note | to use any other antenna besides the original an |
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
Details:, This is another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios., Transmitter features:, - High grade switch regulator., Includes:, - TX-V582 5.8 GHz 200mw transmitter., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The 200mW 5.8 GHz transmitter and receiver are capable to ...HobbyWireless
FPV584 PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mA |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：400mW, Receiver's features:, - R5800 Dual (2x) Audio and Video outputs., Includes:-, Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
FPV582 PLUG AND PLAY 5.8 GHZ 200MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| Receiver's features | - Dual (2x) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：23dBm, Includes:-, Note:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
TR905 COMBO SET RECEIVER +TRANSMITTER 900MHZ 500MW
Details:, This is a great set of 500mw 0.9 GHz (900 MHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR524 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 500MW - LAWMATE
Details:, , Note: The 2.4GHz video system can not be used with any 2.4Ghz radio transmitter, it migh cause severe interferences., Package Includes:, , Transmitter Specs:, , Receiver Specs:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a great set of 500mW 2.4 GHz transmitter ...HobbyWireless
TR313 COMBO SET RECEIVER +TRANSMITTER 1.3 GHZ 300MW
Details:, This is a great set of 300mw 1300 MHz (1.3 GHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Notes:, All transmitters shipped to any addresses within US territory will have only the channel (1280 MHz) is available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR1024 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 1000MW - LAWMATE
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications,(for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Note: We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles. In this case our 900Mhz or 1.2Ghz systems are the right choice., Package Includes:, - Transmitter 2.4ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 2.4 GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
TR1012 COMBO SET RECEIVER +TRANSMITTER 1.2GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications, (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Package includes:, -Transmitter 1.2ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 1.2GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 8 (1280 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
FPV524 PLUG AND PLAY 2.4GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...